HOG iPC Networking ?????

HI to all

Sorry to bother
I am new to the HOG 3 been using HOG 2 for awhile now .
Question one
How can I hook up the following
1 x HOG iPC ( Show Console )
1 x PC running HOG3PC V3.0 ( Back UP )
1 x PC Running WYSIWYG R22 ( Visualizer )
Pls advise me what gears should I get to make it happen .

Question Two
How can I get my HOG 2 Effects convert to be able to use in HOG 3
As I got quite some Effects that we created .
Pls advise

Thanks
Parents
  • 0
    [quote=Chrislim;34703]Pls advise on hooking the following Gears
    Option 1
    1 x HOG 3
    1 x DP 2000
    2 x Hippo


    If you only have the one DP2K you will want to connect it to the Hog Net port on the rear panel of the wholehog 3 using a cat 5 crossover cable. You can then use the DP2K to output DMX to the 2 servers.

    [quote=Chrislim;34703]
    Option 2
    1 x HOG iPc
    2 x Hippo


    Like I said in my email to you chris, we will need some more information about what you are trying to do. You said in your email that you have your iPC connected to the Hippo via a network cable... Are you trying to output art-net to the hippo directly from the iPC? If so.. this isnt possible, you can however add a DP8K to output art-net or more universes from the console. (I think, I would advise checking with HES staff about this first...)

    My best advice would be is to control the servers via DMX directly from the console. Or get a DP8K and use art-net.

    [quote=Chrislim;34703]
    Pls advise how can I get them to work


    Are you trying anything to get them working? Or does the information above solve your problems?
Reply
  • 0
    [quote=Chrislim;34703]Pls advise on hooking the following Gears
    Option 1
    1 x HOG 3
    1 x DP 2000
    2 x Hippo


    If you only have the one DP2K you will want to connect it to the Hog Net port on the rear panel of the wholehog 3 using a cat 5 crossover cable. You can then use the DP2K to output DMX to the 2 servers.

    [quote=Chrislim;34703]
    Option 2
    1 x HOG iPc
    2 x Hippo


    Like I said in my email to you chris, we will need some more information about what you are trying to do. You said in your email that you have your iPC connected to the Hippo via a network cable... Are you trying to output art-net to the hippo directly from the iPC? If so.. this isnt possible, you can however add a DP8K to output art-net or more universes from the console. (I think, I would advise checking with HES staff about this first...)

    My best advice would be is to control the servers via DMX directly from the console. Or get a DP8K and use art-net.

    [quote=Chrislim;34703]
    Pls advise how can I get them to work


    Are you trying anything to get them working? Or does the information above solve your problems?
Children
No Data
Related

www.etcconnect.com