64 bit computers

So I know that Hog3 is not supported by 64-bit windows, and that the wings and widgets are not supported by windows running 64-bit either. However, if I was to put a copy of 32-bit windows on a machine that is built for 64-bit, would that work with all the Hog3 products?

The reason I ask, specifically, is that I'm looking at the HP Touchsmart PC and that is a 64-bit PC. So consequently, I want to know that if I dumb the software to 32-bit, will the hardware still allow me to use Hog3PC, wings, widgets, and DP's?
Parents
  • 0
    Hi Patrick
    I have a hp touch smart. I had the same issues with the 64 bit windows. It used to run but they have now locked it. (the wings never worked.) I have made my computer dual boot so I loads windows vista 64 + 32. By doing this in vista 32 bit mode the hog pc works but not all the drivers are available for the computer. You can run a virtual box and I did get it to work with the dmx out. It was running vista 32 in the virtual box. I ran a show like this and it worked. But as on another thread there isn't a date or timeline for 64 support so I decided to dual boot.
Reply
  • 0
    Hi Patrick
    I have a hp touch smart. I had the same issues with the 64 bit windows. It used to run but they have now locked it. (the wings never worked.) I have made my computer dual boot so I loads windows vista 64 + 32. By doing this in vista 32 bit mode the hog pc works but not all the drivers are available for the computer. You can run a virtual box and I did get it to work with the dmx out. It was running vista 32 in the virtual box. I ran a show like this and it worked. But as on another thread there isn't a date or timeline for 64 support so I decided to dual boot.
Children
No Data
Related

www.etcconnect.com