Full Boar console crashing

Dear HES stuff!

I have trouble with Full boar console. XPE image 1.3.0. and software release 2440 (3.0.2.), patched 24 desk chanels and 10 moving heads.

First of all console needs 10 minutes to load system up. This time has extended when loading last XPE image on. My second urgent problem is that the desk is working perfectly but it often happens that is alive but no dmx output. Dmx values are changing but no effect! Only solution is that I restart the console.

There is no log file for that event.

Please help!

BR
Parents
  • 0
    Grega

    One thing to try is set your IP settings to 'Use Defualt IP Settings' and 'Enable DHCP and Boot Server'.
    I think your deck is looking for an ip address so it is taking a little longer to boot.
    But as Brad stated the full boot up time is less than 3 min.

    Next time the output goes into 'refresh' try the following before restarting the desk.
    1. Hitting 'Blind' then 'Blind' again

    2. Pig+Open+Backspace (
    Right click on the dp8k and Kill the process
    Right click on the dp8k and Restart the process
Reply
  • 0
    Grega

    One thing to try is set your IP settings to 'Use Defualt IP Settings' and 'Enable DHCP and Boot Server'.
    I think your deck is looking for an ip address so it is taking a little longer to boot.
    But as Brad stated the full boot up time is less than 3 min.

    Next time the output goes into 'refresh' try the following before restarting the desk.
    1. Hitting 'Blind' then 'Blind' again

    2. Pig+Open+Backspace (
    Right click on the dp8k and Kill the process
    Right click on the dp8k and Restart the process
Children
No Data
Related

www.etcconnect.com