Full Boar console crashing

Dear HES stuff!

I have trouble with Full boar console. XPE image 1.3.0. and software release 2440 (3.0.2.), patched 24 desk chanels and 10 moving heads.

First of all console needs 10 minutes to load system up. This time has extended when loading last XPE image on. My second urgent problem is that the desk is working perfectly but it often happens that is alive but no dmx output. Dmx values are changing but no effect! Only solution is that I restart the console.

There is no log file for that event.

Please help!

BR
Parents
  • 0
    Grega,

    To supplement Michael's email, it's important that you also set the fixture link adapter to a static IP address as well to ensure a faster bootup. You can do this by launching your show, going into the network window, selecting the DP8000, clicking on settings, and chosing to use a custom static IP address under the artnet tab.

    What's troubling is that even with both network adapters set to DHCP the console should, at worst, only take 2 minutes to boot. So, if setting these adapters to a static IP doesn't help I strongly recommend re-imaging your console with the v1.3.0 recovery image and re-upgrading to 3.0.2.
Reply
  • 0
    Grega,

    To supplement Michael's email, it's important that you also set the fixture link adapter to a static IP address as well to ensure a faster bootup. You can do this by launching your show, going into the network window, selecting the DP8000, clicking on settings, and chosing to use a custom static IP address under the artnet tab.

    What's troubling is that even with both network adapters set to DHCP the console should, at worst, only take 2 minutes to boot. So, if setting these adapters to a static IP doesn't help I strongly recommend re-imaging your console with the v1.3.0 recovery image and re-upgrading to 3.0.2.
Children
No Data
Related

www.etcconnect.com