Anyone now a quick way to temporarily set a deskchannel as a non dim without having to repatch. Am working on a Sci-fi show and my spare circuts are constantly being used for kino's. then swapped back to incandesents. would love to set temp channels used for Flouro's to non dim and then back so when i have a sudden need to run a flicker (usualy just grabbing the master) i wont be worried about blowing flouro transformers.
Change Type is going to be your best option, but that does require re-patching.
As long as you are careful to hit FULL rather than spin the wheel, you shouldn't have any problems.
If the circuits are controlled by a dimmer rack, then you might be able to set the output for those dimmers to be "switched" instead of "dimmed" directly at the rack.
Change Type is going to be your best option, but that does require re-patching.
As long as you are careful to hit FULL rather than spin the wheel, you shouldn't have any problems.
If the circuits are controlled by a dimmer rack, then you might be able to set the output for those dimmers to be "switched" instead of "dimmed" directly at the rack.
