DIFFICULTIES TO LOAD 2.6.0 SHOW

hello every one, what is the good way to load an 2.6.0 show into 3.0.2
release?
My customer have a show did with 3 x Dp2000 using 2.6.0 wholehog III
and the load into 3.0.2 wholehog III with 1 x dp8000+ 1 x dp2000,is not automatically,there is a lost patch and no dmx working.
Please every support is wellcome.

thanks.

Parents

0 Joe Bleasdale over 16 years ago

You need to convert 2 of the DP2ks to 1 DP8k. As for loading the show, what problems are you seeing..? (If any). Shows should be compatible between versions to my knowledge. Also check the 2.6.0 show for errors using the checker in the show manager. This will see if the showfile has any corruption.

Let us know. Regards,

Reply

0 Joe Bleasdale over 16 years ago

You need to convert 2 of the DP2ks to 1 DP8k. As for loading the show, what problems are you seeing..? (If any). Shows should be compatible between versions to my knowledge. Also check the 2.6.0 show for errors using the checker in the show manager. This will see if the showfile has any corruption.

Let us know. Regards,

Children

No Data