• State Not Answered
  • Date
    lightismagic
  • Date
  • Replies 5 replies
  • Subscribers 5 subscribers
  • Views 199 views
  • Users 0 members are here

vitual cuelists.

Hi guys,
I would like to start and stop some chasers with dimmer channels, which are virtual cuelists, with command macros out of my main cuelist. The starting and stopping is not the problem, but the channels stay at 0%. When I move the cuelist to a physical master and add the 'FM xxx/100' comment macro it works, but I would like to keep the chasers virtual.
I'm sure I'm missing here something, has anybody a tip in the right direction?

cheers
Tommi
Parents
  • 0
    From memory.. what is happening is that you need to have them maximum intensity assigned when in virtual. On a master you set the intensity with the fader dont you? But in virtual you start at 0% and run the chase. I think it is a logged enhancement to change this. The best bet would be to move the chase to a master, set its level and move it back again into virtual. That should solve it.

    Hope this helps,
Reply
  • 0
    From memory.. what is happening is that you need to have them maximum intensity assigned when in virtual. On a master you set the intensity with the fader dont you? But in virtual you start at 0% and run the chase. I think it is a logged enhancement to change this. The best bet would be to move the chase to a master, set its level and move it back again into virtual. That should solve it.

    Hope this helps,
Children
No Data
Related

www.etcconnect.com