(3.0.3 b2452) Bug Report: IPC does not output via programmer

Name: Andris Kasparovics
Date: April 16, 2009
Software Version and build number: IPC 3.0.3 b2452 Xpe 8.4.0
Number of displays: 3
Connected USB Devices: 0
Networked Devices: none

Upon boot up at start of day the console will not output anything entered in programmer. Cues play back fine, but Output Window shows zero data for anything manually entered in programmer.
Logging off and on again fixes the issue.
This has happened three days in a row already. The console is always powered down and electrically disconnected at end of day.
Parents
  • 0
    This problem is proving tough to track down. I have been able to reproduce issues with the initialization of playback (not programmer) here on my laptop but it seems to only happen every other time that I start Hog3PC. And while my repro deals with playback and not programmer, I have a feeling the two issues are the same or at least related.

    It's more than likey a timing thing. On thought/question comes to mind:
    Do you have Hog3PC on your iPC set to auto-launch the show on bootup?
Reply
  • 0
    This problem is proving tough to track down. I have been able to reproduce issues with the initialization of playback (not programmer) here on my laptop but it seems to only happen every other time that I start Hog3PC. And while my repro deals with playback and not programmer, I have a feeling the two issues are the same or at least related.

    It's more than likey a timing thing. On thought/question comes to mind:
    Do you have Hog3PC on your iPC set to auto-launch the show on bootup?
Children
No Data
Related

www.etcconnect.com