Using macros

I have a que list that fires off another cuelist using a macro. I was under the impression that the 2nd cue list, which is a chase, does not need to be assigned to a master. Every time I try this, it does not work. I have to move the cuelist to a master in order for the 2nd cuelist to be visible. The cuelist only contains desk channels, but I am still pretty sure nothing is running.

What am I doing wrong?

Ross
Parents
  • 0
    *** From my reply on the LN ***
    "Ross,

    Yes, you can have a chase cuelist not assigned to a master (be a virtual master).

    When you remove the chase cuelist from the fader make sure you have the fader at 100%. If not, then at playback its intensity is at 0%.

    Then just use GL:3, if in fact it is in the List 3 position in the List directory."


    Also, open the List directory (Open + List) and watch the cuelist when you trigger it from cuelist 1.
    You should see it start running.
Reply
  • 0
    *** From my reply on the LN ***
    "Ross,

    Yes, you can have a chase cuelist not assigned to a master (be a virtual master).

    When you remove the chase cuelist from the fader make sure you have the fader at 100%. If not, then at playback its intensity is at 0%.

    Then just use GL:3, if in fact it is in the List 3 position in the List directory."


    Also, open the List directory (Open + List) and watch the cuelist when you trigger it from cuelist 1.
    You should see it start running.
Children
No Data
Related

www.etcconnect.com