I have another customer who owns an iPC and this issue has happened twice. You turn on the console, when it comes to the show menu your external monitor and left monitor, which are plugged into Video card 2 have noise and interference like crazy. Opened the console inspected the card looks good pulled it out reseated it turned the console back on still nothing. In a matter of time with this noise on the monitors the console will just die. You try to turn it on and the red LEDs on the back shows power, but no activity on the hard drive or nothing, the cdrom doesn't even try to read. So at the moment they have a dead console. HAS ANYONE ELSE HAD THIS ISSUE?
Im having similar problems and getting the same error message could not get the console to boot at all at my last show. i have replace video card and right angle conector also bios battery.
I did notice the time was out on the bios setting when i went in to check while I was trying to work out what was going wrong. I replace the battery but no luck.
does anyone have any other ideas as to what could be causing these errors?
Could it be the hard drive, ram or the bios itself?
Im having similar problems and getting the same error message could not get the console to boot at all at my last show. i have replace video card and right angle conector also bios battery.
I did notice the time was out on the bios setting when i went in to check while I was trying to work out what was going wrong. I replace the battery but no luck.
does anyone have any other ideas as to what could be causing these errors?
Could it be the hard drive, ram or the bios itself?
