Show Clone

Hi.
Programmed a show.
Say it contains Vl3w, and VL3S.
Now i walk in, and have a rig with Mac2KW, and Mac2KP.

Can i clone the entire show in one hit?
Fixtures, cues, groups, presets, all that good jazzy stuff?

Like i can on a maxxyz?

Thanks. Help is much appreciated.
Parents
  • 0
    You could try replicate fixture... But I am not entirly sure that would work. At the end of the day if you have Mac 700s programmed then add another 40 2ks to the rig... you might have to program the 2ks. If your 700s are on the floor and the 2ks are in the sky, the positions are going to be wrong for a start off. However changing a 700 wash to a 2k wash should work...

    Regards,
Reply
  • 0
    You could try replicate fixture... But I am not entirly sure that would work. At the end of the day if you have Mac 700s programmed then add another 40 2ks to the rig... you might have to program the 2ks. If your 700s are on the floor and the 2ks are in the sky, the positions are going to be wrong for a start off. However changing a 700 wash to a 2k wash should work...

    Regards,
Children
No Data
Related

www.etcconnect.com