• State Not Answered
  • Date
    ejberendsen
  • Date
  • Replies 7 replies
  • Subscribers 5 subscribers
  • Views 226 views
  • Users 0 members are here

Problems with copy values

We discovered some problems with coping values from one group to an other group of fixtures. Example;

We made a position with spot 1 thru 10, then we did 1 [thru] 10 [Position] [copy] 11 thru 20. Only spot 11 or 11 and 20 will get the value. The rest of the spot are ignored. It happens also when we want to copy colour, beam or effects.

Did anyone else see this issue?

We are using software version 3.0.5 and we see this happen on different shows and console setups (dp 2000's and dp 8000's) and it is happening randomly. For some reason I don't see it happen on HOGPC. So maybe it's related to HOG3 desk and dp's?

Kind Regards,

EJB
Parents
  • 0
    I believe this is due to a bug in the software where fix numbers (not user numbers) are inappropriately being used during the cloning operation.

    For example, if you try to copy fixtures with user number 1

    I am looking into this right now and verifiying this is the issue so I can get a defect openned for it. This would explain why replication the offending fixtures would fix the problem because fix nums are generated when fixtures are added to the fixture schedule.
Reply
  • 0
    I believe this is due to a bug in the software where fix numbers (not user numbers) are inappropriately being used during the cloning operation.

    For example, if you try to copy fixtures with user number 1

    I am looking into this right now and verifiying this is the issue so I can get a defect openned for it. This would explain why replication the offending fixtures would fix the problem because fix nums are generated when fixtures are added to the fixture schedule.
Children
No Data
Related

www.etcconnect.com