New to Lighting need help on some questions~

Hi everybody,

I'm just hired in a club as Lighting assistant, I got a few question need to be answer for me to learn more and play the light to its fullest potential.

1: How can i connect Hog3PC to the RoadHog console?? (is there a converter cabble or device needed?)
2: Is it possible for me to use the RoadHog console as a control surface for the Hog3PC show??
3: Can i copy the show i've programmed in Hog3PC to the RoadHog console to use it??

Anybody willing to teach me about this is highly appreciated...
thanks :)


p/s: pardon me if my grammar is not that good.
Parents
  • 0
    [QUOTE=Joe Bleasdale;39847]Hi. I am sure nobody will have any problems with that :)



    If you have the standard Road Hog, you cannot network in any way. Is it definitly a Road Hog, or a Road Hog Full Boar?



    You can load the show onto the Road Hog (I will explain below) but you cannot connect them together as server and client.



    Simply copy (or save) the show you made on H3PC to a USB memory stick. You can do this by pressing [Setup] >> Then cllick the [Show manager] softkey that will appear in the bottom right hand side of the primary touchscreen.

    Hope this helps :)

    The club is using 2 RoadHog console.. not the Full Boar version,

    1: So means the only thing i can do is to transfer the showfile from 3PC to the console right?
    2: All I have to do is done all the programming in the 3PC by following the grouping in the console and just program cues or palettes correct?

    thank you all for answering my question~ cheers :friday:
Reply
  • 0
    [QUOTE=Joe Bleasdale;39847]Hi. I am sure nobody will have any problems with that :)



    If you have the standard Road Hog, you cannot network in any way. Is it definitly a Road Hog, or a Road Hog Full Boar?



    You can load the show onto the Road Hog (I will explain below) but you cannot connect them together as server and client.



    Simply copy (or save) the show you made on H3PC to a USB memory stick. You can do this by pressing [Setup] >> Then cllick the [Show manager] softkey that will appear in the bottom right hand side of the primary touchscreen.

    Hope this helps :)

    The club is using 2 RoadHog console.. not the Full Boar version,

    1: So means the only thing i can do is to transfer the showfile from 3PC to the console right?
    2: All I have to do is done all the programming in the 3PC by following the grouping in the console and just program cues or palettes correct?

    thank you all for answering my question~ cheers :friday:
Children
No Data
Related

www.etcconnect.com