Hog3, 1 Dp2000 with Road hog Full as back up. Problem = when loading the show from the H3 in the road hog it loads a DP8000 and I can not remove it if I try removing it, it takes out the DP2000 I have hit the wall after a day of Messing with it ?
The PC based platforms will autoconvert anything patched on DP2000 net numbers 1 and 2 to use the internal virtual DP8000.
If you need to take a show back and forth between a HogIII with DP2000 and a RHFB, it's probably easiest to put the DP2000 at netnum 3. You can use the "Clone DP" feature to put the same patch data on both DP8000 #1 and DP2000 #3.
Once you've done that, the show should load on both platforms without any repatching (assuming both are running 3.0.0 or newer)
The PC based platforms will autoconvert anything patched on DP2000 net numbers 1 and 2 to use the internal virtual DP8000.
If you need to take a show back and forth between a HogIII with DP2000 and a RHFB, it's probably easiest to put the DP2000 at netnum 3. You can use the "Clone DP" feature to put the same patch data on both DP8000 #1 and DP2000 #3.
Once you've done that, the show should load on both platforms without any repatching (assuming both are running 3.0.0 or newer)
