Okay, Have a question about pages.

Still very new to programming, but have a question on Pages...Or Intensity sources?

When I have "page 2" open, and move a list to master 2, my flash key starts blinking slow red, (from what I found means it's intensity is under control from another source). If I bring the fader up, and back down during a "go", the light returns to solid.. Which I interuporate as a return of control to the master?

I have tried to assert the master, but no change, opened "outputs, and checked "sources" nothing displays other than my page name.

Am I reading to much into this, or is this normal.

Oh yeah HOG3 IPC v.3.0.4 (b 2468)

Any help would be appreciated!

Thanks

Parents

0 mike hanson - Former HES Forum Member over 15 years ago

If the same cuelist you are moving onto a fader already lives on a fader on another page and is in a released state and that fader is at 100%, then when you move it onto another fader on a different page the flash will blink, because the other cuelist is not played but has control over the intensity. Then when you bring the fader to full and back to 0 this fader will have control over it. Does that make sense?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 mike hanson - Former HES Forum Member over 15 years ago

If the same cuelist you are moving onto a fader already lives on a fader on another page and is in a released state and that fader is at 100%, then when you move it onto another fader on a different page the flash will blink, because the other cuelist is not played but has control over the intensity. Then when you bring the fader to full and back to 0 this fader will have control over it. Does that make sense?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data