Question on cue timming

question on HOG3 iPC, and cues timing.


I looked thru all of the manual to find the answer but could not find it.

When I go into the cue list under FADE, I see the following info for one of my cue times:

2s,3s,5s

Does this mean 2s release time, 3s fade for all, and 5s wait?

Also, how would I input this "timming" with out a ", coma" into the command line?
Parents
  • 0

    In the Fade colum for a cue if you see multi times, this means that you have different fade timing recorded into that cue. Maybe intensity has a 2s fade, maybe position has a 3s fade and maybe color has a 5s fade.
    You can edit the cue and then input the different time for the different parameters. Or when you are building a cue you can change the timing tor the different parameters.

    You cannot just enter multiple times into the cue from the command line without some complicated systex, but it can be dome. You can say:
    Cue 1 intensity time 2 beam time 3 color time 5 enter. This is using the hard button ( Time ) and the hard button ( Intensity, Beam , Color ).

    The release time is changed from the Options for the cuelist. In the tool bar at the top of the cuelist window there is an Options button, this will open the options window, and there you can change the release time.

    The Wait time is entered into the Wait colum of the cuelist. The wait times is the time that a cue waits after the previous cue has been played. You can only have 1 wait time per cue.
Reply
  • 0

    In the Fade colum for a cue if you see multi times, this means that you have different fade timing recorded into that cue. Maybe intensity has a 2s fade, maybe position has a 3s fade and maybe color has a 5s fade.
    You can edit the cue and then input the different time for the different parameters. Or when you are building a cue you can change the timing tor the different parameters.

    You cannot just enter multiple times into the cue from the command line without some complicated systex, but it can be dome. You can say:
    Cue 1 intensity time 2 beam time 3 color time 5 enter. This is using the hard button ( Time ) and the hard button ( Intensity, Beam , Color ).

    The release time is changed from the Options for the cuelist. In the tool bar at the top of the cuelist window there is an Options button, this will open the options window, and there you can change the release time.

    The Wait time is entered into the Wait colum of the cuelist. The wait times is the time that a cue waits after the previous cue has been played. You can only have 1 wait time per cue.
Children
No Data
Related

www.etcconnect.com