Light converse on Hog3pc networking question

Can anyone help me in setting up this network?

I am running Light Converse on my Mac pro and Hog3pc on my mac book via a cat 5 crossover. Both are the latest versions of the software and have the wholehog connectivity drivers installed. I have worked through the manual and the connectivity manual without any success

When i open LC the wholehog dp pops up, the program confirms that connectivity driver is detected, but it cannot find the network. In the Hog network window i know there is a network as I can switch the Hog net adapter to "Gigabit Ethenert controller" as shown in the manual.

Am i manually setting different ip addresses on both computers as well as on the hog3pc? Does this apply to the gateway, netmask, and DNS as well?

Any help would be greatly appreciated...I know its really simple!
Parents
  • 0
    It looks like you have set up the patch properly in LC. Sounds like you may have a networking communication issue between H3PC and the computer LC is running on. Have you tried using just a standard networking cable instead of the crossover cable? Also, is the Hog3PC running as a DHCP server? Do you have any other network connections running to the computer with LC such as Internet?
Reply
  • 0
    It looks like you have set up the patch properly in LC. Sounds like you may have a networking communication issue between H3PC and the computer LC is running on. Have you tried using just a standard networking cable instead of the crossover cable? Also, is the Hog3PC running as a DHCP server? Do you have any other network connections running to the computer with LC such as Internet?
Children
No Data
Related

www.etcconnect.com