Follow and Mark Cues

Is there a way to use "Follow" with Mark Cues?

I can get the Mark Cue to work as expected as long as I launch it manually but if I try to use a "Follow" everything stays at full intensity through the move and the "Mark" in the Mark column never changes color.

Am I missing something or do you have to fire these off manually?

Thanks,

Joe

Parents

0 bradpepe - Former HES Forum Member over 15 years ago

Hi Joe,

It sounds like you probably have a cue with a very short amount of time that is not allowing the mark to complete before the follow hits. So to solve this you can either enter a value in the wait column, or use "follow +" to follow plus a few seconds. The other idea would be to put a zero fade time on the parameters that are marking in the cue that is marked.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 bradpepe - Former HES Forum Member over 15 years ago

Hi Joe,

It sounds like you probably have a cue with a very short amount of time that is not allowing the mark to complete before the follow hits. So to solve this you can either enter a value in the wait column, or use "follow +" to follow plus a few seconds. The other idea would be to put a zero fade time on the parameters that are marking in the cue that is marked.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data