External Monitor on Road Hog

I purchased a VGA to USB adapter to connect an external non-touch LCD screen to my Road Hog. I plugged the adapter into a powered USB hub and then into the Road Hog. I can't get it to recognize the screen.

Is the VGA to USB adapter proprietary to the Hog? My dealer told me I could buy any adapter and didn't have to purchase the one from High End.

What am I doing wrong?
Parents
  • 0
    Hey Brad - I purchased the above unit (GUC2015V) for my Road Hog, but am not getting the green light on the unit when plugging it in/setting it up (it does work when plugged into a laptop). I saw on the HES installation guide for the unit that this may happen in some configurations and that an external power supply may be needed. I just wanted to confirm that I should try this route, and if so can you recommend a site to get the 5V 400mA power supply? (seems to be a little hard to find). Thanks!
Reply
  • 0
    Hey Brad - I purchased the above unit (GUC2015V) for my Road Hog, but am not getting the green light on the unit when plugging it in/setting it up (it does work when plugged into a laptop). I saw on the HES installation guide for the unit that this may happen in some configurations and that an external power supply may be needed. I just wanted to confirm that I should try this route, and if so can you recommend a site to get the 5V 400mA power supply? (seems to be a little hard to find). Thanks!
Children
No Data
Related

www.etcconnect.com