about quelist macros

A question about quelist macros:

I am runnig a show from two lists.
Lists are in faders 9 and 10.

Now the last cue of list 1 on master 9 is running following macros: Go master 10 and Choose Master 10 (GM10: CM10) and the first cue of list 2 on master 10 is runnig macro Release Master 9 (RM9).

This works just fine as an "automatic" list/master change but is there a way to be absolutely sure that list 2 in master 10 is in the first que of the list?

Both lists are used before show rehearsals and this might cause a human error for second cuelist. When it is released it needs to be manually backed to first cue before show. I would like to eliminate one more possibilty of error...
Parents
  • 0
    Jussi

    You can set both list to 'Reset on Release', this way when the lists get a release command they will reset to the first cue in the list.

    Also after the rehearsals do a pig + release to make sure that both list will reset.

    You can set the cues to 'Reset on Release' by holding down the choose button on Masters 9 and 10 and on the right monitor you will see some options appear. Select the 'Reset on Release' option.
    You can also set this option by opening the choosen master and hitting the options tab.
Reply
  • 0
    Jussi

    You can set both list to 'Reset on Release', this way when the lists get a release command they will reset to the first cue in the list.

    Also after the rehearsals do a pig + release to make sure that both list will reset.

    You can set the cues to 'Reset on Release' by holding down the choose button on Masters 9 and 10 and on the right monitor you will see some options appear. Select the 'Reset on Release' option.
    You can also set this option by opening the choosen master and hitting the options tab.
Children
No Data
Related

www.etcconnect.com