about quelist macros

A question about quelist macros:

I am runnig a show from two lists.
Lists are in faders 9 and 10.

Now the last cue of list 1 on master 9 is running following macros: Go master 10 and Choose Master 10 (GM10: CM10) and the first cue of list 2 on master 10 is runnig macro Release Master 9 (RM9).

This works just fine as an "automatic" list/master change but is there a way to be absolutely sure that list 2 in master 10 is in the first que of the list?

Both lists are used before show rehearsals and this might cause a human error for second cuelist. When it is released it needs to be manually backed to first cue before show. I would like to eliminate one more possibilty of error...
Parents
  • 0
    Just noticed a thing about releasing a master with macro.
    The RM macro doesn´t use the release time set in master playback options menu (of the master that I want to release).
    It uses faster default time.
    The actual problem is that the rigging pipes start to swing when fixture positions release too fast.

    Show running now so I cant test, but would changing the default release time to longer help?

    Then of course everything else releases anoyingly slowly by default...

    Any ideas?
Reply
  • 0
    Just noticed a thing about releasing a master with macro.
    The RM macro doesn´t use the release time set in master playback options menu (of the master that I want to release).
    It uses faster default time.
    The actual problem is that the rigging pipes start to swing when fixture positions release too fast.

    Show running now so I cant test, but would changing the default release time to longer help?

    Then of course everything else releases anoyingly slowly by default...

    Any ideas?
Children
No Data
Related

www.etcconnect.com