about quelist macros

A question about quelist macros:

I am runnig a show from two lists.
Lists are in faders 9 and 10.

Now the last cue of list 1 on master 9 is running following macros: Go master 10 and Choose Master 10 (GM10: CM10) and the first cue of list 2 on master 10 is runnig macro Release Master 9 (RM9).

This works just fine as an "automatic" list/master change but is there a way to be absolutely sure that list 2 in master 10 is in the first que of the list?

Both lists are used before show rehearsals and this might cause a human error for second cuelist. When it is released it needs to be manually backed to first cue before show. I would like to eliminate one more possibilty of error...

Parents

0 jussikamunen - Former HES Forum Member over 15 years ago

Thanks Marty,

I now tried "non-releasable" also. Works for me also. Need to remember this for future use also. I havent used Edit fixtures menu/function often. Actually never before this...

Many good solutions (as usual), but I still returned to releasing with macro and setting the priority.

Somehow the non-releasable operation reminded too much of MA "htp-style" programming in scancommander/licon...

Reply

0 jussikamunen - Former HES Forum Member over 15 years ago

Thanks Marty,

I now tried "non-releasable" also. Works for me also. Need to remember this for future use also. I havent used Edit fixtures menu/function often. Actually never before this...

Many good solutions (as usual), but I still returned to releasing with macro and setting the priority.

Somehow the non-releasable operation reminded too much of MA "htp-style" programming in scancommander/licon...

Children

No Data