John something that I'd do for dimmer checking is do a 1-to-1 patch on an entire, spare, universe.
Add 512 Desk Channels, lets say User numbers 1-512, type 1 Thru 512 @ 1/1 ENTER (#/# = Universe/DMX Address). Close the Fixture Window, open the Programmer, Select Fixture 1, Press Highlight, then Next to start advancing through your channels.
This is really handy if you are only using Universes 1-3 and can do the 1-to-1 patch on Universe 4. Simply take the cable out of one of the first three Universes and plug it into Universe 4 when you need to do the checking. If you use all four Universes you could go as far as "juggling" universes by cloning them back and forth when needed.
John something that I'd do for dimmer checking is do a 1-to-1 patch on an entire, spare, universe.
Add 512 Desk Channels, lets say User numbers 1-512, type 1 Thru 512 @ 1/1 ENTER (#/# = Universe/DMX Address). Close the Fixture Window, open the Programmer, Select Fixture 1, Press Highlight, then Next to start advancing through your channels.
This is really handy if you are only using Universes 1-3 and can do the 1-to-1 patch on Universe 4. Simply take the cable out of one of the first three Universes and plug it into Universe 4 when you need to do the checking. If you use all four Universes you could go as far as "juggling" universes by cloning them back and forth when needed.
