HOG3 PC only 1 widget found

Hi all,

A curious thing, I have a PC with HOG3 program and 3 widget on USB ports.
Every widget is found by windows XP SP2, but only 1 is found at a time with HOG 3 program.
Every widget work if I change it on the same USB port.
Is there something to do under HOG3 setup or in windows setup ?

Best regards
Parents
  • 0
    The internal DP8000 is a virtual DMX engine that runs on your PC that allows you to connect single or superwidgets to get DMX output. On 3PC you are limited to 8 universes (2 superwidgets) worth of physical dmx output.

    To configure the widgets to work with your internal dmx processor 8000 you will need to patch at least one fixture to get the dmx processor 8000 to the point where is says "Outputs Active" in the network window. From there you will want to click the settings button for the dmx processor 8000 in the network window and navigate to the dmx widgets outputs tab. The rest should be pretty easy to figure out.
Reply
  • 0
    The internal DP8000 is a virtual DMX engine that runs on your PC that allows you to connect single or superwidgets to get DMX output. On 3PC you are limited to 8 universes (2 superwidgets) worth of physical dmx output.

    To configure the widgets to work with your internal dmx processor 8000 you will need to patch at least one fixture to get the dmx processor 8000 to the point where is says "Outputs Active" in the network window. From there you will want to click the settings button for the dmx processor 8000 in the network window and navigate to the dmx widgets outputs tab. The rest should be pretty easy to figure out.
Children
No Data
Related

www.etcconnect.com