Strobe Question

Hy!
i have a simple question about the strobe programming!

i have 4x martin atomic on a cuelist - when i press the flash-button all other fixtures and generics should be dark...

How is this doable?

pls. describe me the way as simple as possible!
big thx!
Parents
  • 0
    Hog 3-

    In the Cuelist window, press the 'Options' softkey in the top toolbar.
    In the left sidebar, select 'Master' under CONTROLS.
    Here you can adjust the settings for the Cuelist buttons. For the 'Click' button (bottom button) make sure 'Flash' is selected in the pulldown. The click on 'Solo' so that it is selected.
    Solo makes whatever is recorded in that particular Cuelist live, and anything that is not in the cuelist receives an intensity of 0%.
Reply
  • 0
    Hog 3-

    In the Cuelist window, press the 'Options' softkey in the top toolbar.
    In the left sidebar, select 'Master' under CONTROLS.
    Here you can adjust the settings for the Cuelist buttons. For the 'Click' button (bottom button) make sure 'Flash' is selected in the pulldown. The click on 'Solo' so that it is selected.
    Solo makes whatever is recorded in that particular Cuelist live, and anything that is not in the cuelist receives an intensity of 0%.
Children
No Data
Related

www.etcconnect.com