Hi Guys, Using a HOG 3 and the right hand touch screen died is there a quick command to flip screens? As all the saving shut down etc comes up on the right hand screen. Cheers Nigel
Are you saying: 1: LCD display shows an image properly, but the touch feature doesn't work. --or-- 2: The LCD itself does not display anything?
I read your post as case 1, and that's the solution I described.
I would strongly advise *against* hitting the back of the console. Any force that's hard enough to deform the back panel and to re-seat the connector also risks cracking the LCD or dislodging one of the flex cables internal to the display.
Sometimes the display driver cable can work loose. If you're comfortable working inside your console you can re-attach it.
Are you saying: 1: LCD display shows an image properly, but the touch feature doesn't work. --or-- 2: The LCD itself does not display anything?
I read your post as case 1, and that's the solution I described.
I would strongly advise *against* hitting the back of the console. Any force that's hard enough to deform the back panel and to re-seat the connector also risks cracking the LCD or dislodging one of the flex cables internal to the display.
Sometimes the display driver cable can work loose. If you're comfortable working inside your console you can re-attach it.
