Hi Guys, Using a HOG 3 and the right hand touch screen died is there a quick command to flip screens? As all the saving shut down etc comes up on the right hand screen. Cheers Nigel
I would strongly advise *against* hitting the back of the console. Any force that's hard enough to deform the back panel and to re-seat the connector also risks cracking the LCD or dislodging one of the flex cables internal to the display.
There is also the USB Controller PCB and the two Backlight PCBs on either side of the display. A hit behind the displays could also cause damage to one of these which is more time consuming and costly to replace than removing the LCD Panel and checking the cables properly.
I would strongly advise *against* hitting the back of the console. Any force that's hard enough to deform the back panel and to re-seat the connector also risks cracking the LCD or dislodging one of the flex cables internal to the display.
There is also the USB Controller PCB and the two Backlight PCBs on either side of the display. A hit behind the displays could also cause damage to one of these which is more time consuming and costly to replace than removing the LCD Panel and checking the cables properly.
