The choose key above the assert has no function as far as I am aware. I would like to see used as a faderless master like the ones on the expansion wing.
Technically that's how it functions today. You can record a list or scene to the center choose button and select i just like any other master (except the choose light won't come on).
Speaking about choose buttons... I have had on quite a few occasions a stuck choose button. The display then shows Cuelist rate/speed without touching a choose button. I have to press all choosebuttons (or the one that got stuck) in order to get it loose...
Someone ever had this too??? Seems like a bad switch, or is it a software thing???
Generally, the "Cuelist Rate/speed" information gets "stuck" when you delete a list from a fader (leaving it blank). It will stick there until you choose another fader.
Not sure why it's still around, but generally, the work around is to choose another fader with a list on it and it will clear out.
[QUOTE=c_muenchow;45705]Technically that's how it functions today. You can record a list or scene to the center choose button and select i just like any other master (except the choose light won't come on).
You are right, I guess I never tried this cause the button doesn't light up. Thanks for the help.
[QUOTE=improve;45717]Speaking about choose buttons... I have had on quite a few occasions a stuck choose button.
If you are using a full Hog-3 make sure that the metal plate over the control surfaces is seated properly....I've seen a few times where these are ever so slightly off and it will cause keys to "stick" on the cutouts.
