Hog 3 PC Internal Widget Problem

Hi all
a bit of a problem getting Hog 3 PC 2.1 to recognize the internal widget in a Program wing, the computer see's the widget but no amount of trying will connect the Program Widget to the DP of the Hog 3 Software, I cannot even add a DP to get a universe Happening, any idea's or suggestions on this would be greatly appreciated

Kind regards J.P
Parents
  • 0
    > DMX512 Super Widget-Internal

    That's your problem. The widget is configured to be an internal widget. The widget in a RH Wing should be an external widget (it's internal to the wing, but external to the console, and the console is what matters).

    Pull the widget out of the wing. You'll see four tiny DIP switches. Chage the position of switch 1 and re-install the widget. It should now show up as an external widget and allow you to configure it.
Reply
  • 0
    > DMX512 Super Widget-Internal

    That's your problem. The widget is configured to be an internal widget. The widget in a RH Wing should be an external widget (it's internal to the wing, but external to the console, and the console is what matters).

    Pull the widget out of the wing. You'll see four tiny DIP switches. Chage the position of switch 1 and re-install the widget. It should now show up as an external widget and allow you to configure it.
Children
No Data
Related

www.etcconnect.com