Hog 3 and Wysiwyg connectivity questions

A few questions that if answered might help with my current insanity from trying every combination of getting wysiwyg and hog 3 to talk.

1. Can you run the visualiser (wysiwyg) and hog 3 pc on same computer?

2. my current setup:
xp servicepack 3
wysiwyg version 23,
I've installed hog 3 pc (current version)
I've installed hog 3 connectivity driver.
Is this all correct or are there compatibility issues?

3.Is there a preferred order of software setup?
I have been opening wysiwyg which triggers virtual dp / connectivity driver
( set to port 6600, user number 1 )
My show has 9 vl2500's patched,
the device in the device manager is hog3 dp
the universe is bound to universe A,

4. Is there something in dp8000 patch or dmx setup or ip of desk or port settings that i need to worry about

At the moment The Wholehog III DP window always says Locating Wholehog III Net-work but never locates it, wysiwyg will not connect either

Any help would be greatly appreciated,
Thanks
Mick


P.s. i have read everything in forums and wysiwyg and high end manuals i could get my hands on and couldnt figure it out
Parents
  • i'm pretty sure i used to be able to run it with my older version or wysiwyg and older version of hog 3, which required the loopback adapter to work, it definitely worked on hog 2, i really don't want to lug a second computer around on tour, i just want to capture looks with auto focus, quick and easy and get some design work on 2 new shows off the ground,
    Though this was a reply from Dany Tancou in wysiwyg.... ?????
Reply
  • i'm pretty sure i used to be able to run it with my older version or wysiwyg and older version of hog 3, which required the loopback adapter to work, it definitely worked on hog 2, i really don't want to lug a second computer around on tour, i just want to capture looks with auto focus, quick and easy and get some design work on 2 new shows off the ground,
    Though this was a reply from Dany Tancou in wysiwyg.... ?????
Children
No Data