Hog 3 and Wysiwyg connectivity questions

A few questions that if answered might help with my current insanity from trying every combination of getting wysiwyg and hog 3 to talk.

1. Can you run the visualiser (wysiwyg) and hog 3 pc on same computer?

2. my current setup:
xp servicepack 3
wysiwyg version 23,
I've installed hog 3 pc (current version)
I've installed hog 3 connectivity driver.
Is this all correct or are there compatibility issues?

3.Is there a preferred order of software setup?
I have been opening wysiwyg which triggers virtual dp / connectivity driver
( set to port 6600, user number 1 )
My show has 9 vl2500's patched,
the device in the device manager is hog3 dp
the universe is bound to universe A,

4. Is there something in dp8000 patch or dmx setup or ip of desk or port settings that i need to worry about

At the moment The Wholehog III DP window always says Locating Wholehog III Net-work but never locates it, wysiwyg will not connect either

Any help would be greatly appreciated,
Thanks
Mick


P.s. i have read everything in forums and wysiwyg and high end manuals i could get my hands on and couldnt figure it out
Parents
  • 0
    Thanks Cormac,
    Still no Joy, have installed paralells as someone mentioned that their hog 3 and wysiwyg work fine on paralells but not bootcamp.... am still no further. The virtual dp or connectivity driver searches on port 6600 but never sees the hog 3. I even installed hog2 pc today for a play around and it works fine but no go with hog 3, i couldnt remove connectivity driver as its not in add/remove programs, tried to re-install hoping for a repair / replace window...still no joy.... am going to try re installing hog 3 pc from scratch then wysiwyg from scratch. Cast didn't believe that you could run wysiwyg on the same machine as hog 3, yet everyone else thta has replied to this has been successful.... so much so that they don't remember the original process too well...... i guess i'll try again....any other brainstorming out there would be a great help as this is wrecking my head
    Mick:confused:
Reply
  • 0
    Thanks Cormac,
    Still no Joy, have installed paralells as someone mentioned that their hog 3 and wysiwyg work fine on paralells but not bootcamp.... am still no further. The virtual dp or connectivity driver searches on port 6600 but never sees the hog 3. I even installed hog2 pc today for a play around and it works fine but no go with hog 3, i couldnt remove connectivity driver as its not in add/remove programs, tried to re-install hoping for a repair / replace window...still no joy.... am going to try re installing hog 3 pc from scratch then wysiwyg from scratch. Cast didn't believe that you could run wysiwyg on the same machine as hog 3, yet everyone else thta has replied to this has been successful.... so much so that they don't remember the original process too well...... i guess i'll try again....any other brainstorming out there would be a great help as this is wrecking my head
    Mick:confused:
Children
No Data
Related

www.etcconnect.com