• State Not Answered
  • Date
    Mark Scott
  • Date
  • Replies 5 replies
  • Subscribers 5 subscribers
  • Views 184 views
  • Users 0 members are here

RoadHog and RHFB Wing Trouble

Hi

Today I was trying to use a RoadHog(v3.1.5) with a RHFB wing (with the touch screen). it was connected with the recommended IO gear dongle. I could not get an image up on the screen. I discovered that the touch screen was working because I could cycle windows on to it and blindly select stuff. Where is the image???? Could not find brightness or contrast controls...... Any sage words of wisdom.... (and advice on how to fix this problem?

Thanks,

Mark
Parents
  • 0
    The controls for the screen (4 small white buttons) are on top of the wing, next to the desk lamp.
    The first button is Auto Set.
    Set the resolution in the menu to 800x600, press Apply.
    Then press the first button of the screen controls on the wing (Auto Set).
    Then open the Programmer and press the Move Button once or twice in the upper toolbar on the right screen of the Console.
    The Programmer Window should then appear on the screen of the wing.

    Hope this helps

    Greets Mayli
Reply
  • 0
    The controls for the screen (4 small white buttons) are on top of the wing, next to the desk lamp.
    The first button is Auto Set.
    Set the resolution in the menu to 800x600, press Apply.
    Then press the first button of the screen controls on the wing (Auto Set).
    Then open the Programmer and press the Move Button once or twice in the upper toolbar on the right screen of the Console.
    The Programmer Window should then appear on the screen of the wing.

    Hope this helps

    Greets Mayli
Children
No Data
Related

www.etcconnect.com