RoadHog and RHFB Wing Trouble

Hi

Today I was trying to use a RoadHog(v3.1.5) with a RHFB wing (with the touch screen). it was connected with the recommended IO gear dongle. I could not get an image up on the screen. I discovered that the touch screen was working because I could cycle windows on to it and blindly select stuff. Where is the image???? Could not find brightness or contrast controls...... Any sage words of wisdom.... (and advice on how to fix this problem?

Thanks,

Mark

Parents

0 james dike - Former HES Forum Member over 15 years ago

Well after trial and error and talking to Brad, there is a work around if you do not enable the monitor before you load your show
Enable the monitor at 60Hz, it will not show up yet.

Unplug and replug your USB cable to the video adapter, eventually on a multiple try Windows will recognise the adapter and load the drivers so that the monitor will work.
Now you can calibrate your touch screens again.

James Dike

Reply

0 james dike - Former HES Forum Member over 15 years ago

Well after trial and error and talking to Brad, there is a work around if you do not enable the monitor before you load your show
Enable the monitor at 60Hz, it will not show up yet.

Unplug and replug your USB cable to the video adapter, eventually on a multiple try Windows will recognise the adapter and load the drivers so that the monitor will work.
Now you can calibrate your touch screens again.

James Dike

Children

No Data