• State Not Answered
  • Date
    Ryoung
  • Date
  • Replies 9 replies
  • Subscribers 5 subscribers
  • Views 314 views
  • Users 0 members are here

Time Code Widget Issues

This is a bit of an odd one. I have a show chasing to TC through an LTC Widget, when we run the track the console doesn't receive code. If I unplug the widget and then plug it back in while the code is still running it starts displaying the timecode and the show runs fine. If the track stops rolling and then starts again, the code stops working agin and I have to repeat the process. Originally the console was running on a very old software version (2.4) I've since upgraded to 3.1.5 and am still having the same problems. Has any one else encountered anything like this?

Thanks,

Ryan
Parents
  • 0
    If you're able to run other shows with the same equipment, then the widget is probably fine. And you said it works fine with a new show, so it may be something odd about that particular show.

    Did the timecode timestamps come over from the Hog2 showfile, or did you reenter it after the conversion?

    Is the timecode recorded on one of the Radar's tracks, or is it generated on the fly?

    You might want to have support take a look at your showfile.
Reply
  • 0
    If you're able to run other shows with the same equipment, then the widget is probably fine. And you said it works fine with a new show, so it may be something odd about that particular show.

    Did the timecode timestamps come over from the Hog2 showfile, or did you reenter it after the conversion?

    Is the timecode recorded on one of the Radar's tracks, or is it generated on the fly?

    You might want to have support take a look at your showfile.
Children
No Data
Related

www.etcconnect.com