Two things the biggest problem is our hog 3 at the shop is running version 3.1.3 I think something like that. Well we have tried multiple time to update the software in it and its telling us that its not seeing it on anything we put in it, usb or disk. I know that both the usb drives and the disk drive is working because I can load shows from them. and its way past due to update our software to its been almost a year. But I have checked the name to make sure it says what its supposed to and it does and advice? Also when I hit the tab button on top to open up the manual the manual wont open it just does nothing now.
Maybe I have worked with every family of hog3 and 2 my memorys bad anyways so thats quite possible that Im thinking I have loaded it off the three from usb [QUOTE=Marty Postma;47669]Right...well there are USB ports on the back of the full H3, but USB flash drives won't work in them (yet).
You must have either a RoadHog, RoadHog Full Boar, or an iPC if you have used a USB flash drive.
Maybe I have worked with every family of hog3 and 2 my memorys bad anyways so thats quite possible that Im thinking I have loaded it off the three from usb [QUOTE=Marty Postma;47669]Right...well there are USB ports on the back of the full H3, but USB flash drives won't work in them (yet).
You must have either a RoadHog, RoadHog Full Boar, or an iPC if you have used a USB flash drive.
