3.1.6 (b2773) Crash today

I just received my Hog 3 back with a replacement motherboard. The last few days, I've noticed it taking longer and longer to connect to the show server upon startup of the console. Sometimes it takes 3 or 4 "attempts" before it connects.

This weekend, it was having problems again. It was decided to leave the console on over night to make sure the service could run this morning. At the end of the second service (just playback...not programming), it crashed. Attached is the stack.

Hopefully the stack will help sort it out...
Parents
  • 0
    I really don't like seeing those 10 TX errors. One a properly functioning network you should have almost no errors and you're getting nearly 1% with errors. That's bad news.

    Try using different cables, and a different port on the switch. Try a different switch if you have one. Also make sure you don't have a duplex mismatch between the two ends of the link.

    What kind of switch are you using? Can you see packet error statistics on the switch?
Reply
  • 0
    I really don't like seeing those 10 TX errors. One a properly functioning network you should have almost no errors and you're getting nearly 1% with errors. That's bad news.

    Try using different cables, and a different port on the switch. Try a different switch if you have one. Also make sure you don't have a duplex mismatch between the two ends of the link.

    What kind of switch are you using? Can you see packet error statistics on the switch?
Children
No Data
Related

www.etcconnect.com