3.1.6 (b2773) Crash today

I just received my Hog 3 back with a replacement motherboard. The last few days, I've noticed it taking longer and longer to connect to the show server upon startup of the console. Sometimes it takes 3 or 4 "attempts" before it connects.

This weekend, it was having problems again. It was decided to leave the console on over night to make sure the service could run this morning. At the end of the second service (just playback...not programming), it crashed. Attached is the stack.

Hopefully the stack will help sort it out...
Parents
  • 0
    Heres the latest from today's testing.

    Tried turning off DHCP and starting show - 6 attempts to contact to show server failed
    Tried turning DHCP back on and starting show - 6 attempts to contact show server failed
    Tried creating s brand new show with DHCP on - failed as soon as I hit continue after selecting the library and locked at a black "X" on the right screen and splash on the left. Had to hard restart the console.
    Boot time was VERY long - approximately 4:30. *Sat at the black "x" for quite a while and I thought it was dead. Finally got to the start screen after just letting it sit.
    Connected Hog3PC back up. Set the main console to #2 and turned off "run server" hit apply. Immediately, I was able to connect to the Hog3PC show as a client with no problems. No TX/RX errors or drops.

    So back to the original question....can this be related to the new motherboard!? Do I need to get it swapped back out??!
Reply
  • 0
    Heres the latest from today's testing.

    Tried turning off DHCP and starting show - 6 attempts to contact to show server failed
    Tried turning DHCP back on and starting show - 6 attempts to contact show server failed
    Tried creating s brand new show with DHCP on - failed as soon as I hit continue after selecting the library and locked at a black "X" on the right screen and splash on the left. Had to hard restart the console.
    Boot time was VERY long - approximately 4:30. *Sat at the black "x" for quite a while and I thought it was dead. Finally got to the start screen after just letting it sit.
    Connected Hog3PC back up. Set the main console to #2 and turned off "run server" hit apply. Immediately, I was able to connect to the Hog3PC show as a client with no problems. No TX/RX errors or drops.

    So back to the original question....can this be related to the new motherboard!? Do I need to get it swapped back out??!
Children
No Data
Related

www.etcconnect.com