• State Not Answered
  • Date
    bhorowitz
  • Date
  • Replies 9 replies
  • Subscribers 5 subscribers
  • Views 431 views
  • Users 0 members are here

Full Boar Artnet settings

So I've been trying to get a Hog Full Boar to interface to my MacBook Pro i7 running ESP Vision3. I have not yet been successful, but have managed to screw up the network settings on the Full Boar, those that pop up when you hit the Network softkey to get to the Artnet settings.

The IP addresses for the Console, Server and DMX all show 127.0.0.1 with all 0's for the Ethernet MAC addresses.

Is there a way for me to reset this to some sort of default? I've trued rebooting, new show, etc.

I've not yet managed to get ESP Mac to see the artnet input. I'll talk to ESP in the morning, but thought that someone here may have a suggestion.

Thanks,

Bud Horowitz
Parents
  • 0
    The network window gives you information about the Hog-Net network. Since there's nothing connected to that port, you won't see a MAC address. If you connect it to a network, you will see the MAC address show up.

    If you want to get information about the Fixture Link network setup, you'll need to select the Virtual DP8000 from the list and click "Settings". From within that configuration window you can configure the Fixture network port and Art-Net output.
Reply
  • 0
    The network window gives you information about the Hog-Net network. Since there's nothing connected to that port, you won't see a MAC address. If you connect it to a network, you will see the MAC address show up.

    If you want to get information about the Fixture Link network setup, you'll need to select the Virtual DP8000 from the list and click "Settings". From within that configuration window you can configure the Fixture network port and Art-Net output.
Children
No Data
Related

www.etcconnect.com