i've been trying to use the M-audio Uno for MSC on the road hog. sometimes it works, but most of the time it doesn't. it is supposed to be hot swap, but i have to restart the console a bunch of times before it works (if it does). is anyone successfully using midi on the road hog? any info is appreciated. i bought an expensive show control program, and spent lots of hours programming it, and can rarely use it. totally bugging me. thanks.
I will be using the USB - Midi UNO on 12 consoles here in sweden shortly so i assume if there is a general problem i´ll find it. Some general tips though: - Make sure the connectors have no oxide, clen with alcohol and "cottontipstick" - Try both outlets - Make sure you have the latest 3.1.7 Software installed - The LEDs on the UNO, does the USB one, blink flash or have a steady light? Compare it to the behaviour when installed to your PC
And good luck, ill get back in as soon as i have tried my first set up here.
I will be using the USB - Midi UNO on 12 consoles here in sweden shortly so i assume if there is a general problem i´ll find it. Some general tips though: - Make sure the connectors have no oxide, clen with alcohol and "cottontipstick" - Try both outlets - Make sure you have the latest 3.1.7 Software installed - The LEDs on the UNO, does the USB one, blink flash or have a steady light? Compare it to the behaviour when installed to your PC
And good luck, ill get back in as soon as i have tried my first set up here.
