i've been trying to use the M-audio Uno for MSC on the road hog. sometimes it works, but most of the time it doesn't. it is supposed to be hot swap, but i have to restart the console a bunch of times before it works (if it does). is anyone successfully using midi on the road hog? any info is appreciated. i bought an expensive show control program, and spent lots of hours programming it, and can rarely use it. totally bugging me. thanks.
The UNO driver has a known issue that it does not properly communicate to the application layer when it is connected so you must have the device connected before logging onto your show. If the device is disconnected unfortunately you have to log off/on to have the application again recognize the driver.
Obviously, this is not ideal and outside of our control and recommend if you require MIDI you use FB or Hog3 that has midi built-in.
The UNO driver has a known issue that it does not properly communicate to the application layer when it is connected so you must have the device connected before logging onto your show. If the device is disconnected unfortunately you have to log off/on to have the application again recognize the driver.
Obviously, this is not ideal and outside of our control and recommend if you require MIDI you use FB or Hog3 that has midi built-in.
