i've been trying to use the M-audio Uno for MSC on the road hog. sometimes it works, but most of the time it doesn't. it is supposed to be hot swap, but i have to restart the console a bunch of times before it works (if it does). is anyone successfully using midi on the road hog? any info is appreciated. i bought an expensive show control program, and spent lots of hours programming it, and can rarely use it. totally bugging me. thanks.
You do need a USB Midi interface to get MIDI IN to the Roadhog. The only one supported is the M-Audio UNO. Just to be sure that we have the same problem there are a few things to check: - Does it work on your computer? - Do you have a XPe 1.4.0 - 1.6.0? - Do you have Software 3.1.7? - Do you see a slowly fading led (usb) on the UNO? - Have you enabled the MSC In or the Notes In in the Network Settings Window?
I suspect that you get it to work if you start a new show with the UNO connected and then after patching etc, Choose Exit and Log Off, then just restart the same show.
You do need a USB Midi interface to get MIDI IN to the Roadhog. The only one supported is the M-Audio UNO. Just to be sure that we have the same problem there are a few things to check: - Does it work on your computer? - Do you have a XPe 1.4.0 - 1.6.0? - Do you have Software 3.1.7? - Do you see a slowly fading led (usb) on the UNO? - Have you enabled the MSC In or the Notes In in the Network Settings Window?
I suspect that you get it to work if you start a new show with the UNO connected and then after patching etc, Choose Exit and Log Off, then just restart the same show.
