road hog playback wing

Yet another question.
So I am trying to help out some friends that have a Road hog.

Playback wing lights up. connects to the console, faders respond, touch responds but not correctly but I get nothing on the screen.

I can connect my computer to the wing monitor and it works perfectly.

It has a VGA to USB adapter but it is Not powered. They lost the power supply.

I feel the problem is the usb port might not be powering the VGA adapter.

Any help would be great. I just updated the console software to the 3.1.7
i have tried the calibrate and all that with no luck.

Thanks.
Parents
  • 0
    ok. So I have installed the 1.4.0. and then installed the new software to 3.1.7 and everything should be all good.

    But the problem is still there. I looked at the components closer today. My vga to usb does say display link certified. My big issue is the USB to VGA does not have a power adapter. Does anyone think this item requires external power? Are the usb ports on the back of the Hog bus powered?

    the touch screen seems to calibrate 100% and all the faders work but the screen just sits dark.
Reply
  • 0
    ok. So I have installed the 1.4.0. and then installed the new software to 3.1.7 and everything should be all good.

    But the problem is still there. I looked at the components closer today. My vga to usb does say display link certified. My big issue is the USB to VGA does not have a power adapter. Does anyone think this item requires external power? Are the usb ports on the back of the Hog bus powered?

    the touch screen seems to calibrate 100% and all the faders work but the screen just sits dark.
Children
No Data
Related

www.etcconnect.com