road hog playback wing

Yet another question.
So I am trying to help out some friends that have a Road hog.

Playback wing lights up. connects to the console, faders respond, touch responds but not correctly but I get nothing on the screen.

I can connect my computer to the wing monitor and it works perfectly.

It has a VGA to USB adapter but it is Not powered. They lost the power supply.

I feel the problem is the usb port might not be powering the VGA adapter.

Any help would be great. I just updated the console software to the 3.1.7
i have tried the calibrate and all that with no luck.

Thanks.

Parents

0 mayli - Former HES Forum Member over 14 years ago

Hy guys,

I had the same problem three weeks ago on a tour.
The problem was, that the voltage at the FoH was about 200 Volts. (Europe;))
This is not really a problem for an UPS, but it seems to be a problem for the the external USB -> VGA adapter and the Road Hog+Wing plugged up to it.
I tried it without the UPS, and it worked fine.

greets Mayli
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 mayli - Former HES Forum Member over 14 years ago

Hy guys,

I had the same problem three weeks ago on a tour.
The problem was, that the voltage at the FoH was about 200 Volts. (Europe;))
This is not really a problem for an UPS, but it seems to be a problem for the the external USB -> VGA adapter and the Road Hog+Wing plugged up to it.
I tried it without the UPS, and it worked fine.

greets Mayli
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data