IO Gear usb to VGA problem

Hello,

I'm the proud owner of a Road Hog. I have a build in usb to VGA device from IO gear. It does not send the picture to the external monitor.

If i look in Control Panel>Diagnostics>view usb devices it shows 2 devices; Road Hog Front panel and The super widget. I think this is the io gear unit??

I have also tried to restart the console with the VGA connector in or out the console and enable/disable the external monitor.

Who can help me??
Parents
  • 0
    Paul

    It sounds like you are tring to perform a restore from your hard drive, this is correct in that we only allow you to create a bootable stick or a partial restore.
    In order to perform a full install you must burn a CD and use and external drive.
    Or make a USB stick bootable and put the files on the stick.

    Please perform a FULL Install of the OS and try the usb to vga again.
    You can download the image here:
    www.flyingpig.com/phpscripts/roadhog/recovery.php
    You will need your serial number of your Road Hog.
Reply
  • 0
    Paul

    It sounds like you are tring to perform a restore from your hard drive, this is correct in that we only allow you to create a bootable stick or a partial restore.
    In order to perform a full install you must burn a CD and use and external drive.
    Or make a USB stick bootable and put the files on the stick.

    Please perform a FULL Install of the OS and try the usb to vga again.
    You can download the image here:
    www.flyingpig.com/phpscripts/roadhog/recovery.php
    You will need your serial number of your Road Hog.
Children
No Data
Related

www.etcconnect.com