Running 3.1.6. I'm trying to use an inhibitive master to control the intensity of some leds; it's mostly working fine, with the fader. But the bump button acts only as a DBO with the master up, rather than taking the intensity to full with the master fader down. Funny thing is, when I first recorded it, it worked as expected. Then after playing any cue with led color, it suddenly switches to this DBO mode. Even deleting and re-recording the master has no effect. The flash button percentage is set to 100% in cuelist options, playing with this percentage has no effect.
Hi Chris, Would be great if you could have some sort of news section on the forum where users can see current state of play regarding software updates. The last information i read on the forum was that v3.2.0 would not now be released in 2010 and you are confirming that here by saying spring 2011. Why not not just put that in a small static section on the forum for everyone to see? Looking forward to Spring 2011
Hi Chris, Would be great if you could have some sort of news section on the forum where users can see current state of play regarding software updates. The last information i read on the forum was that v3.2.0 would not now be released in 2010 and you are confirming that here by saying spring 2011. Why not not just put that in a small static section on the forum for everyone to see? Looking forward to Spring 2011
