Mac 700 Profile strobe channel weirdness

Hi there,

I´m working on a musical production which premiere is running on this same moment. For some reason our Mac 700 profiles strobe channel is acting quite strange way. When i set fixtures at full and add strobe nothing happens but after few seconds intensity fades smoothly out. If i knockout strobe parameter, intensity comes back at full. Strobe channel did work at wednesday when i created pallets to our LD. Today, i also tried to create a clean show and i did patch only few Mac 700 but same problem appears.
Any idea what could cause this? All our other fixtures, Mac III Performances, Tw-1s and VL2500 washes are working just fine.

We are using one Wholehog III (3.1.7) with miniwing and one quite fully loaded DP2000.
There are also two monitors and keyboard connected.
_______
ottot
Parents
  • All our fixtures are in extended mode. I tried to reinstall 3.1.7 image without any luck.
    But after i created a clean show with my laptop and merged just Mac 700 lib to our
    current show file problem did disappear.

    But today just before show same problem came out. Programmer, output and dmx output
    windows shows that right data has been sent to right channels.

    Is it possible that our show file is somehow corrupted? Has someone at HES to time to
    check out our show file through?
    _______
    ottot
Reply
  • All our fixtures are in extended mode. I tried to reinstall 3.1.7 image without any luck.
    But after i created a clean show with my laptop and merged just Mac 700 lib to our
    current show file problem did disappear.

    But today just before show same problem came out. Programmer, output and dmx output
    windows shows that right data has been sent to right channels.

    Is it possible that our show file is somehow corrupted? Has someone at HES to time to
    check out our show file through?
    _______
    ottot
Children
No Data
Related