We couldn´t update our dp8k with hog3 and 3.1.8 software.
Forcing update by pressing buttons at startup didn´t help.
Tried with crosscable and switch, no difference.
The dp8k just ran thru a text loop and ended up waiting for update command. Hog3 tried to update the dp8k (as it should), but the dp never got the new software. The textloop in dp8k screen is very fast, but at the end it says that something "FAILED". And after this just endlesly new update suggestions after dp8k loop and the same again and again.
Luckily we had also a Full Boar with 3.1.8.
We connected dp8k to full boar with crosscable (same cable we tried with hog3) and update was succesfull with first try.
After this when both hog3 and dp8k had the same software the system works just fine.
Both hog3 and fullboar have automatical ip settings and running dhcp etc etc... very basic setup.
Updating system has worked just fine up to version 3.1.7.
