I'm having an issue with my RGB LED's. (Using Generic RGB LED profile)
If I change the color live in the programmer, all seems fine. However, if I do it in blind (and use PIG+BLIND for timing) or in cues, there are some strange anomalies that are happening.
Example:
Cue 1 - LEDs in Amber at 58%
Cue 2 - LEDs change to Congo (just changing color)
Have cue 1 running....
Now, press BLIND
Select LED's
Select another color (Congo for example)...no intensity selected
Color Time 5 Enter
Pig+Blind
The LEDs will drop intensity in a 0 count and then fade to the color in the programmer restoring the intensity. Even with Intensity in the programmer at 58% (matching the cue), I still get the intensity drop.
I doesn't show this in the output window, but if you open the DMX window, you can see it doing it. Coming out of the programmer (Pig+Blind again) it will fade properly. I have tried everything I can think of to get it NOT to do it, but I can't get around it. The only thing I've been able to do is take the intensity out, delay the color in a 0 count and restore the color. I don't think I should have to be doing this.
Any ideas....
