swop channels

Hello,

Is there a function in the Hog3 software to swop channels ?? i couldn't find it anywhere.

thanks

Maarten
Parents
  • 0
    Well if it is simply a Desk Channel, the easiest approach would be to swap the DMX patch for those two channels in Patch.

    To do this in Patch/Fixture Spreadsheet.
    - Select 4 +10
    - press Unpatch
    - select 4 and patch @ former DMX of 10
    - select 10 and patch @ former DMX of 4

    If this is not what you are looking for then you will need to use the COPY command to clone from one to the other.

    You can find more detailed information on how to use COPY in the manual.

    Hope this helps. :)
Reply
  • 0
    Well if it is simply a Desk Channel, the easiest approach would be to swap the DMX patch for those two channels in Patch.

    To do this in Patch/Fixture Spreadsheet.
    - Select 4 +10
    - press Unpatch
    - select 4 and patch @ former DMX of 10
    - select 10 and patch @ former DMX of 4

    If this is not what you are looking for then you will need to use the COPY command to clone from one to the other.

    You can find more detailed information on how to use COPY in the manual.

    Hope this helps. :)
Children
No Data
Related

www.etcconnect.com