• State Not Answered
  • Date
    alimagator
  • Date
  • Replies 6 replies
  • Subscribers 5 subscribers
  • Views 292 views
  • Users 0 members are here

Visualizer DP Idle Will Not Connect. "Waiting for node association."

I'm trying to get Hog 3 PC talking to ESP Vision and have not had any luck for quite some time. I've gone through the connection guides and they've done nothing for me. When launched, the Visualizer DP remains in the Idle Status and the info just says "Waiting for node association" Has anybody else encountered this or have a solution?
Parents
  • 0
    Same problem here.

    Using a IPC version 3.2.1, with a XP Pro SP2 with WYSIWYG R22.
    Latest DP driver, on Port 6600, User number 1.


    Using a crosscable, Unabled all scanners, firewalls, networkproducts.

    Settings for the connection works fine, IPC report: Visualizer: Idle

    Report Visualizer DP: Waiting for node association

    Made a showfile with 10 deskchannels, patched on DP 1, patched aswell at WYSIWYG, but still no response.

    After a few attempts i shut down both, reboot the IPC first, load the showfile. After that i reboot the WYSIWYG PC, no results.

    Has anybody else a solution?
Reply
  • 0
    Same problem here.

    Using a IPC version 3.2.1, with a XP Pro SP2 with WYSIWYG R22.
    Latest DP driver, on Port 6600, User number 1.


    Using a crosscable, Unabled all scanners, firewalls, networkproducts.

    Settings for the connection works fine, IPC report: Visualizer: Idle

    Report Visualizer DP: Waiting for node association

    Made a showfile with 10 deskchannels, patched on DP 1, patched aswell at WYSIWYG, but still no response.

    After a few attempts i shut down both, reboot the IPC first, load the showfile. After that i reboot the WYSIWYG PC, no results.

    Has anybody else a solution?
Children
No Data
Related

www.etcconnect.com